Connecting to a Wireless Network (For LED 5 series 32-46 inches)

To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB port. See illustration below:

Note:

• You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network
• Ensure the TV is turned off before you connect the Samsung Wireless LAN Adapter
• The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied
• Connection Methods: You can setup the wireless network connection on different ways:

1. Auto Setup (Using the auto network search function)

2. Manual Setup

3. WPS

Method 1

Connect using the USB right angle adapter. To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps:

1. Connect the USB right angle adapter to the Samsung Wireless LAN Adapter.

2. Connect the other end of the right angle adapter to the USB (HDD) port.

Method 2

Connect via an extension cable. To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps:

1. Connect the extension cable to the USB (HDD) port.

2. Connect the extension cable and Samsung Wireless LAN Adapter.

3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using double-sided adhesive tape.

• The Samsung Wireless LAN Adapter should be installed in an interferencefree area in order to avoid interference between the adapter and tuner

Network Setup (Auto)

1. Go to Network Settings screen. To enter it, follow the directions of Network Settings

2. Select the Wireless (general).

3. The Network function searches for available wireless networks. When done, it displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTER button.

• If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct network Name (SSID) and Security key to establish the connection.

5. If the Security screen pop-up appears, go to step 6. If you select the wireless router which does not have security, go to step 7.

6. If the wireless router has security, enter the Security key(Security or PIN), then select Done.

• When you enter the Security key (Security or PIN), use ▲/▼/◄ /► buttons on your remote to select number/ characters.
• You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.

7. The network connection screen appears, and network setting is done.

• If it fails to set Security key (Security or PIN), select Retry or IP Settings.
• If you want to set connection manually, select the IP Settings. Refer to following “How to set up manually”.

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.

2. Select the IP Settings on network connection screen.

3. Set IP Mode to Manual.

4. Press the ▼ button on your remote to go to the first entry field.

5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another.

6. When done, select the OK.

7. The network connection screen appears, and network setting is done

Network Setup (WPS)

How to set up using WPS

If your router has a PBC (WPS) button, follow these steps:

1. Go to Network Settings screen. To enter it, follow the directions of Network Settings.

2. Select the WPS.

3. Press the WPS button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network.

4. The network connection screen appears, and network setting is done.