Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is being broadcast:

 

1. Press the MENU button on the remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the Network icon and press OK. The Network Connection menu is displayed.

3. If you do not see your wireless network displayed, highlight More Access Points and press OK. The More Access Points menu, which is a list of available wireless networks, is displayed.

4. Highlight the name of your wireless network (this is the network’s SSID) and press OK.

5. Using the QWERTY Keypad on the remote, enter your network’s password, then highlight Connect and press OK

6. Press the EXIT button on the remote.

 

To connect to a wireless network whose network name (SSID)  is not being broadcast:

1. Press the MENU button on the remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the Network icon and press OK. The Network Connection menu is displayed.

3. Highlight Enter Access Point Name and press OK.

4. Using the QWERTY Keypad on the remote, enter your network’s name (SSID), then highlight Connect and press OK.

5. Using the QWERTY Keypad on the remote, enter your network password, then highlight Connect and press OK.

6. Press the EXIT button on the remote.

  

Changing the Advanced Network Settings

To change advanced network settings:

1. From the Network Connection menu, highlight Manual Setup and press OK. The Change Settings menu is displayed.

2. Use the Arrow and OK buttons to adjust each setting:

• DHCP
• IP Address
• Subnet Mask
• Default Gateway
• Pref. DNS Server
• Alt DNS

3. If you need the RJ45 (ethernet) MAC address or the Wireless MAC address to set up your network, these are displayed at the bottom of the Change Settings menu.

4. Press the EXIT button on the remote